Shop by category
Excavators
Skid steer loaders
Excavator & trailer packages
Trailers
Attachments
Spare parts
Shop our range of products with shipping Aus-wide!
TRENCHERS TO SUIT MINI MULTIFIT & SMALL SKID STEERS REQUIRED FLOW: 38 - 90 LPM
Trenchers - Machines up to 1.5T
REQUIRED FLOW: 38 - 90 LPM SUITABILITY: MINI LOADERS / MINI SKID STEER LOADERS
Ideal for mini machines up to 1.5 tonne, including brands such as Dingo, Toro, Kanga, Vermeer & more. The Mini Bigfoot Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction.
Adjustable depth skid foot
Precision depth control ensures the spoil auger has optimum ground clearance. Take advantage of every bit of valuable horsepower when trenching. Preset depths: 450 / 600 / 750 / 900mm.
Heavy duty crumbing system
Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the trench for maximum spoil removal from start to finish.
Skid foot can be seen from the cab
The new design foot can be clearly seen from the cab and allows the operator to see when the trencher is in the correct trenching position. No need for a spotter.
A cleaner work-side of the trench
Digga's new foot design also feeds overburden back onto the chain, transferring it to the spoil auger for a cleaner clearer work side of the trench.
Anti-back flex chain design
You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions.
Trench in all ground conditions
Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in.
Chains for all ground conditions
- EARTH - Best used in soft ground like earth and clay
- COMBINATION - Best used in dry, hard or medium ground conditions
- TUNGSTEN - Best used in hard or frozen ground conditions and asphalt
| Specification | Mini |
|---|---|
| Cutting Width | 100 / 150 / 200 mm |
| Foot Depth Presets | 450 / 600 / 750 / 900 mm |
| Hydraulic Flow | 38-90 lpm |
| Motor Size | 2K Bell Danfoss |
| Max Pressure - Do not exceed | 240 bar @ 60 lpm |
| Max Flow - Do not exceed | 95 lpm @ 200 bar |
| Max Continuous Power | 25 Kw (34 hp) |
| Weight - with built in frame* | 198 kg |
| Weight - with bolt on frame* | 230 kg |
| Length | 1402 mm |
| Horizontal Height | 645 mm |
| Width | 989 mm |
(*) Applies to a mini trencher with a 150mm combo chain. Weight is an approximation only.
*SURCHARGE FOR NON-STANDARD FRAMES MAY APPLY
Due to the dimensions of this item, all deliveries will be shipped to the closest freight depot, or Commercial business with forklift facilities. Please note, that any location with a house is considered a residential property, including farms and businesses .